Thermix KPH 1500 Classic Hydronic (1545 Watts/5270 BTU)
KPH-1500 classic can be integrated straight into your existing central heating system. This model KPH 1500-C in the hydronic range providing an outputs of 1.26 kW on normal speed and 1.45 kW on boost speed(@70° C entering water temp.).
Our classic models come with two speed option and integral water temperature switch to activate the heater when central heating system comes on.
-
- Heat Output¹: 1260 watts(normal speed) & 1450 watts(boost speed) @ 70°C.
-
- Room Size Guide²: Upto 27 m³.
-
- Noise Level: 31dBA (normal speed) & 36 dBA (boost speed)
-
- Max. motor power: 19 watts
-
- Accessories: None
Product Brochure / Technical Drawing / Product Manual – Click Here
Included in the Package
•Heater unit with two speed switch
•White Grille (fixed to the unit) – Made out of 0.9mm steel for extra strength
•Pair of 15mm ompression flexible hose(900mm long)-WRAS Approved
•2X Grille fixing Screws
•Instruction manual
•3A Fuse
•Screw Caps
Grille Colours
•White
•Light Grey
•Black
•Anthracite
•Navy
•Brushed Stainless Steel
•Self-Colour
• Power supply 230V-50Hz
• Electrical Connection via 3A fused spur
• Heat output of 1260 watts @ Normal speed and 1450 watts @ Boost speed. (Based on entering water temperature of 70°C).
• Max. Operating pressure : 6bar
• Pipe connection size: 15mm
• Warranty is 2 year parts , repair or replace the product if it is found to be defective in material or workmanship. (This warranty does not apply to damage resulting from abuse or unreasonable use or supplemental damage caused by incorrect installations).
• Product weight 4.5kg
• Product dimensions: 500mm x 290mm x 100mm (LxDXH)
• Minimum clearance of 20mm between top of product and underside of shelving required
(1): All the heat outputs are tested in accordance with BS4856 using entering temperature of 70°C and flow rate of 340 l/h.
(2): Rooms size guide for guidance only based on reasonably insulated walls(i.e insulated cavity walls) and entering water temerature of 75°C