Thermix KPH 2100 Classic Hydronic (2150 watts/7335 BTU)
€380.00 – €390.00
Central Heating Kitchen Plinth Heater
All of our KPH hydronic can be integrated straight into your existing central heating system. This model KPH 2100-C model in the hydronic range providing outputs of 1.90 kW on normal speed and 2.15 kW on boost speed (@ 75 deg c entering water Temp.). Our classic models come with two speed option and integral water temperature switch to activate the heater when central heating system comes on.
Product Brochure / Technical Drawing / Product Manual – Click Here
Central Heating Kitchen Plinth Heater
KPH-2100 classic is a highly energy efficient fan convector that fits into the plinth of a kitchen unit eliminating the need for conventional radiators. This brings considerable space saving to allow you to design your kitchen.
With the help of low water content in the heat exchanger and fan convector technology our plinth heaters provides much quicker heating to the space. Such a low water content gives very minimal residual heat when the heating goes off
Kitchen plinth heaters are predominantly used in domestic applications where the plinth mounting feature makes it ideal for heating kitchens, utility rooms and bathrooms (low voltage model only ). Kitchen plinth heaters are ideal for certain non-domestic application’s such as office reception areas, restaurants.
Details
| Grille Colour | White, Light Grey, Anthracite, Black, Navy, Brushed Stainless Steel, Self Colour |
|---|
– Power supply 230V-50Hz
– Electrical Connection via 3A fused spur
– Heat output of 1500 watts @ Normal speed and 1700 watts @ Boost speed. (Based on entering water temperature of 70°C).
– Max. Operating pressure : 6bar
– Pipe connection size: 15mm
– Warranty is 2 year parts, repair or replace the product if it is found to be defective in material or workmanship. (This warranty does not apply to damage resulting from abuse or unreasonable use or supplemental damage caused by incorrect installations).
– Running Costs can be Approx. 20 pence per week(based on 5 hours of running per day on new electric rates)
– Product weight 4.5kg
– Product dimensions: 500mm x 290mm x 105mm (LxDXH)
– Minimum clearance of 20mm between top of product and underside of shelving required.
•Heater unit with Two speed switch
•Grille (fixed to the unit) – Made out of 0.9mm steel for extra strength
•Pair of 15mm compression flexible hose (900mm long) – WRAS approved.
•2X Grille fixing Screws
•Instruction manual
•3A Fuse
•Screw Caps
Reviews
There are no reviews yet.